|
|
 |
|
 |
| |
UV/Visible Light Intensity Meters
UV Minder - Radiometer/Dosimeter
This handheld radiometer/dosimeter is designed to monitor UV light sources used in a wide range of UV curing applications and it is perfect for educational and environmental monitoring efforts focusing on ultraviolet properties.
Process control setting: The UV Minder can assist equipment operators and managers alike to optimize the curing window for adhesion and superior surface cure.
Educational setting: The UV Minder can be used as a
teaching tool due to its multiple functions (UV irradiance and UV dose over time), and its rugged construction and very affordable price.
Advantages
- Capture both Dose and Irradiance: The UV Minder offers both measurements to help managers and equipment operators identify the best “cure window.”
- Integral Sensor and Remote Probe Flexibility: The UV Minder comes standard with a built in UV A+B sensor, and A+B probe for direct work surface measurements. Additional remote probes are available. Remote probes offer the most flexibility for measuring radiant energy arriving at the work surface.
- NIST Traceable: The UV Minder is calibrated using a NIST traceable standard.
- Affordable: With its broad range of features and low cost, the UV Minder is the industry’s best valued radiometer/dosimeter.
Applications
- UV Curing: Optimize UV exposure by measuring bulb intensity and exposure duration.
- Calibrate and Characterize: Test your UV radiation source to maximize effectiveness and productivity.
- Evaluate UV leakage: Utilize the UV Minder’s built in UV A+B sensor to quantify the amount of UV light scattered into the work environment.
UviCure Plus
- Used in curing applications of inks, adhesives, soldermasks, and epoxies (not for use in web press applications)
- Incorporates one UV spectral response range
- Display provides readout of total UV dosage in Joules/cm2 and peak UV intensity in Watts/cm2
- Measures UV lamp performance
- Compares the efficiencies of different UV curing systems
UV Power Puck
- Used in curing applications of inks, adhesives, soldermasks, and epoxies (not for use in web press applications)
- Incorporates four separate spectral response ranges and measures all four simultaneously
- Display scrolls through UV dosage in Joules/cm2 and peak UV intensity in Watts/cm2 of all four separate UV spectral response ranges
- Measures UV lamp performance (and possible bandwidth shift for doped lamps)
- Compares the efficiencies of different UV curing systems
SpotCure
- Monitors the output of a UV "spot curing" system
- Provides indication of light guide degradation and spot curing system degradation
- Measures intensities up to 19.99 Watts/cm2
- Includes several different size light guide adaptors for maximum flexibility
|
|
|
 |
|
 |
|
