Ultrabond

Grade 706 & 717 (Clear to Amber Liquid)

• UV Cure Only
• Use for Bonding Clear Plastics to Metal
• Ultrabond 706 is a low viscosity system that wicks into preassembled parts. Ultrabond 717 is a high viscosity product applied during assembly. Long wave UV is required to cure, and surfaces exposed to air require secondary UV exposure.
• Both formulations are excellent for bonding clear plastics (PVC, PC, ABS, etc.) to metals. Typical applications include disposable medical devices, display goods, guard, and shields.
• Comparison Chart

Grade 735 (Amber Liquid)

• UV or EF Primer 50 Cure
• Fast Cure Times
• General Purpose Bonding
• Ultrabond 735 is a dual cure, medium viscosity, quick curing anaerobic adhesive for general purpose application on rigid substrates. Bonds are flexible and tough. UV curing can achieve fixture times of 5-15 seconds.
• Ultrabond 735 works equally well with metals, thermoset plastics, ceramics, and glass. Parts can be opaque.
• Comparison Chart

Grade 736 (Amber Liquid)

• UV or EF Primer 56 Cure
• Structural Anaerobic
• Flexible Bonds
• Tough Coatings
• Ultrabond 736 is a dual cure system which uses UV and/or EF Primer 56 to produce tough and flexible bonds and coatings. Maximum gap filling abilities is .060" with UV and .040" with Primer.
• 736 delivers high tensile shear strength, excellent impact resistance and temperature integrity to 275 degrees Fahrenheit.
• Use 736 for bonding glass to glass, glass in combination with other materials, and metal to metal bonds.
• Comparison Chart

Grade 740 (Clear Liquid)

• UV Cure Only
• Potting & Tacking
• Cures Optically Clear
• Ultrabond 740 cures with great optical clarity. Gaps approach .250 inch.
• Ultrabond 740 provides excellent resistance to humidity and moisture. The cured bond is resistant to discoloring over long periods of time.
• Use 740 for glass, metals, some thermoplastics, and ceramics.
• Comparison Chart

Grade 748 (Clear Liquid)

• UV or EF Primer 56 Cure
• High Temperature
• Bonding & Sealing
• Deep Potting
• Ultrabond 748 is a high temperature, dual cure anaerobic adhesive with working temperatures up to 350 degrees Fahrenheit and gap filling capabilities up to .125 inch.
• 748 provides excellent impact and fatigue resistance as well as resistance to solvents, oil, and moisture. Applications include: tamper-proofing, terminal insulating, potting electronic components, and assemblies in severe environments.
• Comparison Chart

Grade 755 (Pale Yellow Liquid)

• UV Cure Only
• Instant Cures
• Instant Tacking Agent
• Ultrabond 755 is an instant tacking and termination adhesive. Use for wire tacking and coil termination.
• Ultrabond 755 is a rapid cure UV adhesive that will cure with short or long wavelength UV lamps. Exposed adhesive or one substrate must allow transmission of UV to the bondline.
• Comparison Chart

Grade 757 (Pale Yellow Liquid)

• UV Cure Only
• Instant Cures
• General Purpose
• Ultrabond 757 is a general purpose rapid cure UV adhesive system.
• Ultrabond 757 is a rapid cure UV adhesive that will cure with short or long wavelength UV lamps. Exposed adhesive or one substrate must allow transmission of UV to the bondline.
• Ultrabond 757 Applications: medical products: catheters, cannulae, disposables. General electronic component bonding, sealing, coating.
• Comparison Chart

Grade 758 (Clear Liquid)

• UV Cure Only
• High Temperature
• Low Viscosity
• Shallow Potting
• Ultrabond 758 is a fast fixturing, general purpose, shallow potting compound with gap filling capabilities to .100 inch. In assembly line applications the low viscosity promotes rapid self leveling and excellent penetration. Thermal integrity is 350 degrees Fahrenheit.
• Use 758 for shallow potting and encapsulation on assembly line applications.
• Comparison Chart

Ultrabond Comparison Chart